EN

Strainer type T

Product Information

Size:  DN50-DN2000

DIN EN1092-1 (DIN2501)

Pressure:: PN 10-PN16-PN25.

Flange drilling: 

in accordance with the standard

Scope of application: 

Strainers are equipment used to collect suspended solids in pipelines. The installation position of this equipment is often considered before the control valves, at the outlet of the pumps inside the well (sanding) and where it is necessary to collect the suspended solutes and impurities in the fluid.

  • This type of strainer has a vent screw on the cap and a drain screw on the bottom.the pumps inside the well (sanding) and where it is necessary to collect the suspended solutes and impurities in the fluid.
  • This type of strainer has a vent screw on the cap and a drain screw on the bottom.